聚乙烯-高密度聚乙烯 – www.Eurasiapetrol.com

聚乙烯-高密度聚乙烯

产品规格

聚乙烯 | HDPE （高密度聚乙烯） | 52518

产品类别
聚合物

产品名称
:聚乙烯- HDPE(高密度聚乙烯)

等级
52518

PROPETY	Unit	Value	Test Method
Density	(g/ml)	0.952	ASTM D 1505
MFR(190°C/2.16kg)	(g/10min)	18	ASTM D 1238
Flexural modulus	(MPa)	1350	ASTM D 790
Notched Izod impact at 23°C	(J/m)	25	ASTM D 256/A
Vicat softening point	(°C)	122	ASTM D 1525

用途
家具产品，高流动性-注塑级

包装
25公斤塑料袋

下载产品规格

高密度聚乙烯 | 52518

产品规格

聚乙烯 | HDPE（高密度聚乙烯）| BL3

产品类别
聚合物

产品名称
聚乙烯- HDPE(高密度聚乙烯)

等级
BL3

PROPETY	Test Method	Unit	Value
Mass density (230C)	ISO 1183	g/cm3	0.954
Melt Flow Rate (1900C/5.0kg)	ISO 1133	g/10min	1.2
Melt Flow Rate (1900C/21.6 kg)	ISO 1133	g/10min	23
Stress at Yield	ISO 527	MPa	26
Flexural Creep Modulus (4point,1min)	DIN 19537-2	MPa	1300
Tensile Modulus (230C, v = 1mm / min ,Secant)	ISO 527	MPa	1250
Stress at Break	ISO 527	MPa	32
Elongation at Break	ISO 527	%	>600
Elongation at yield	ISO 527	%	10
Softening Temperature	ISO 306	0C	77
Brittle Temperature	ASTM D746-72	0C	< - 80
Shore D hardness	ISO 868	-	62
ESCR in Full Notch Creep Test (800C, 2% Arcopal h@3.5 MPa	ISO CD 16770
Impact strength (230C)	ISO 179/1eA	Kj/m2	10
Swell ratio	Internal	%	120

用途
小型吹塑-瓶子-容器（最大 5 升）-药品和表面活性剂的包装。

包装
25公斤塑料袋

下载产品规格

高密度聚乙烯 | BL3

产品规格

聚乙烯| HDPE（高密度聚乙烯）|EX3

产品类别
聚合物

产品名称
:聚乙烯- HDPE(高密度聚乙烯)

等级
EX3

PROPETY	Unit	Typical Value	Test Method
Mass density (230 C)	g/cm3	0.956	ISO 1183
Melt Flow Rate (1900C/5.0kg)	g/10min	3.3	ISO 1183
Melt Flow Rate (1900C/21.6kg)	g/10min	33	ISO 1183
Stress at Yield	MPa	27	ISO 527
Flexural Creep Modulus (4point, 1min)	MPa	1350	DIN 19537-2
Tensile Modulus (230 C, v = 1mm / min ,Secant)	MPa	1200	ISO 527
Stress at Break	MPa	31	ISO 527
Elongation at Break	%	>1000	ISO 527
Elongation at yield	%	10	ISO 527
Softening Temperature	0C	8	ISO 306
Brittle Temperature	0C	< - 80	ASTM D746-72
Shore D hardness	-	62	ISO 868
ESCR in Full Notch Creep Test (800C, 2% Arcopal )	h@2.5 MPa	2	ISO CD 16770
Impact strength (230C)	Kj/m2	23	ISO 179/1eA

用途
单丝、绳索、纱线-鱼网土工布&聚丙烯的管

包装
25公斤塑料袋

下载产品规格

高密度聚乙烯

产品规格

聚乙烯| HDPE(高密度聚乙烯)|EX5

产品类别
聚合物

产品名称
:聚乙烯- HDPE(高密度聚乙烯)

等级
EX5

PROPETY	Test Method	Unit	Value
Mass density (230 C)	ISO 1183	g/cm3	0.949
Melt Flow Rate (1900C/5.0kg)	ISO 1133	g/10min	0.28
Melt Flow Rate (1900C/21.6kg)	ISO 1133	g/10min	8
Stress at Yield	ISO 527	MPa	24
Stress at Break	ISO 527	MPa	35
Softening Temperature	ISO 306	0C	75
Brittle Temperature	ASTM D746-72	0C	< - 80
Shore D hardness	ISO 868	-	60
Max. tensile strength MD / TD	ISO 527	MPa	45/40
Tear strength MD / TD	ISO 6383-2	m N	200/450
Max. elongation MD / TD	ISO 527	%	400/450
Dart Drop Impact	ASTM D 1709	g	220

用途
薄膜挤出-柜台袋、购物袋-包装薄膜

包装
25公斤塑料袋

下载产品规格

高密度聚乙烯

产品规格

聚乙烯| HDPE(高密度聚乙烯) |HB-0035

产品类别
聚合物

产品名称
:聚乙烯- HDPE(高密度聚乙烯)

等级
HB – 0035

PROPETY	Test Method	Unit	Value
Mass density (230 C)	ASTM D 1505	g/cm3	0.959
Melt Flow Rate (1900 C/2.16 kg)	ASTM D1238	g/10min	0.35
Izod impact strength	ASTM D 256	Kg.cm/cm	25 min
Yellow index	ASTM D 1925	-	-5 max
Ash content	ASTM D 1063	wt%	0.06 max
Volatile matter	ASTM D 1960	wt%	0.05 max
Tensile strength @ break	ASTM D 638	gr/cm2	290 min
Elongation @ break	ASTM D 638	%	900 min
Melting point	ASTM D 2117	oC	130
Vicat softening point	ASTM D 1525	oC	126
ESCR	ASTM D 1693	hr	15

用途
小型吹塑•瓶子•集装箱（最大5升）

包装
25公斤塑料袋

下载产品规格

高密度聚乙烯

产品规格

聚乙烯| HDPE(高密度聚乙烯)|P-80

产品类别
聚合物

产品名称
:聚乙烯- HDPE(高密度聚乙烯)

等级
EX3-80_HM5010T2N – PE 80

PROPETY	Test Method	Unit	Value
Mass density (230C)	ISO 1183	g/cm3	0.945
Melt Flow Rate (1900C/5.0kg)	ISO 1133	g/10min	0.45
Melt Flow Rate (1900 C/21.6 kg)	ISO 1133	g/10min	12
Stress at Yield	ISO 527	MPa	22
Flexural Creep Modulus (4point, 1min)	DIN 19537-2	MPa	950
Tensile Modulus (230C, v = 1mm / min ,Secant)	ISO 527	MPa	850
Stress at Break	ISO 527	MPa	35
Elongation at Break	ISO 527	%	>850
Elongation at yield	ISO 527	%	8
Softening Temperature	ISO 306	0 C	67
Brittle Temperature	ASTM D746-72	0 C	< - 80
Shore D hardness	ISO 868	-	60
ESCR in Full Notch Creep Test (800 C, 2% Arcopal )	ISO CD 16770	h@4.0 MPa	50
Impact strength (230 C)	ISO 179/1eA	Kj/m2	23
Expected Properties on Application
S4 Test (RCP)	ISO DIS 13477	Bar	Pc> 3
Notch Test (SCG)	ISO DIS 13479	h@4.0 MPa	>250
Hydrostatic strength test (800 C)	ISO 1167	h@4.6 MPa	>1000

用途
管材挤出 PE 80 级-工业和压力管道、燃气管道、饮用水管道-低压管，换衬，管建

包装
25公斤塑料袋

下载产品规格

高密度聚乙烯 | PE – 80

产品规格

聚乙烯| HDPE(高密度聚乙烯)| PE – 100

产品类别
聚合物

产品名称
聚乙烯- HDPE(高密度聚乙烯)

等级
EX3100S_HMCRP100 N PE 100

PROPETY	Test Method	Unit	Value
Mass density (230C)	ISO 1183	g/cm3	0.94
Melt Flow Rate (1900C/5.0kg)	ISO 1133	g/10min	0.22
Melt Flow Rate (1900C/21.6 kg)	ISO 1133	g/10min	6.2
stress at Yield	ISO 527	MPa	23
Flexural Creep Modulus (4point, 1min)	DIN 19537-2	MPa	1050
Tensile Modulus (230C, v = 1mm / min ,Secant)	ISO 527	MPa	850
Stress at Break	ISO 527	MPa	36
Elongation at Break	ISO 527	%	>1000
Elongation at yield	ISO 527	%	10
Softening Temperature	ISO 306	0C	74
Brittle Temperature	ASTM D746-72	0C	< - 80
Shore D hardness	ISO 868		62
ESCR in Full Notch Creep Test (800C, 2% rcopal )	ISO CD 16770	h@4.0 MPa	400
Impact strength (230C)	ISO 179/1eA	Kj/m2	25
S4 Test (RCP)	ISO DIS 13477	Bar	Pc> 20
Notch Test (SCG)	ISO DIS 13479	h@4.6 MPa	>1000
Hydrostatic strength test (800c)	ISO 1167	h@4.6 MPa	>15000

用途
管材挤出 PE 80 级-工业和压力管道、燃气管道、饮用水管道-低压管，换衬，管建

包装
25公斤塑料袋

下载产品规格

高密度聚乙烯 | PE – 100

其他产品